Wesley PCT-3510-6SA ST Manual de usuario descargar pdf (Pagina 24)

Owner’s Manual and Service Guide – PC & PCT Series 24

MAINTENANCE INSTRUCTIONS

TIRES AND WHEELS

The PCT series has a 5,000 lb tow capacity. The transaxle

has a five bolt pattern for the wheels.

The following tire options are offered with the PCT series

vehicle:

1) Pneumatic tires (standard)

2) Foam-filled tires

3) Solid tires (black)

4) Solid non-marking tires (off-white)

5) Soft solid tires

Pneumatic tires are tubeless tires filled with air and mounted

on one piece rims. They offer the smoothest ride but do

require regular maintenance to ensure proper air levels are

maintained and require immediate repair should they go flat.

Foam-filled tires replace the air inside pneumatic tires with a

foam compound and are mounted on one piece rims. This

retains the smoother ride of pneumatic tires but eliminates

the regular maintenance associated with pneumatic tires.

However, if a vehicle equipped with foam-filled tires sits for

extended periods of time, flat spots may form.

Solid tires are solid rubber compound mounted on a two

piece rim. They eliminate the possibility of flat spots and the

maintenance associated with pneumatic tires but because

they are solid, they do not provide as smooth a ride as

pneumatic tires. Solid non-marking tires operate in the same

manner but are made of a rubber compound that prevents

black marks on floors.

Soft Solid tires are a rubber wheel which has molded

recesses in the tire that create a smoother ride similar to a

pneumatic tire.

Replacing Front Tires/Wheels: To remove and repair the

front tires and/or wheels, complete the following steps:

1) Remove the axle nut retaining clip.

2) Lift the front of the vehicle as explained in the

“Lifting the Vehicle” Section.

3) Loosen the axle nuts and remove the entire wheel,

hub and axle assembly from front fork.

4) Remove the lug nuts and remove the wheel from

the axle assembly.

5) Reinstall the repaired or replacement tire by

reversing the above sequence. Tighten to 70 to 80

ft. lbs. (95 to 108 Nm) torque.

Replacing Rear Tires/Wheels: To remove and repair the

rear tires and/or wheels, complete the following steps:

1) Loosen the lug nuts on the wheel.

2) Lift the rear of the vehicle as explained in the

“Lifting the Vehicle” Section.

3) Remove the lug nuts and remove the wheel from

the transaxle.

4) Reinstall the repaired or replacement tire by

reversing the above sequence. Tighten to 70 to 80

ft. lbs. (95 to 108 Nm) torque.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Comentarios a estos manuales

Sin comentarios

Wesley PCT-3510-6SA ST Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Izar Wesley PCT-3510-6SA ST